Chromatography Autosampler Vial Caps Only
Microsolv Technology Corporation Caps, Snap Top, with 1.0mm thick, Orange Rubber / Transparent TEF Septa, fitted in Smooth, soft polyethylene, Blue Caps. For use with 11mm, 12x32mm Snap Top autosampler vials. 100/PK.
Caps, Snap Top, with 1.0mm thick, Orange Rubber / Transparent TEF Septa, fitted in Smooth, soft polyethylene, Blue Caps. For use with 11mm, 12x32mm Snap Top autosampler vials. 100/PK.
Microsolv Technology Corporation Caps, Snap Top, with Red PTFE / White Silicone Rubber / Red PTFE Septa, fitted in smooth, polyethylene, Red Caps. For use with 11mm, 12x32mm Snap Top autosampler vials. 1000/CS.
This septa was designed for specific, older instruments such as Agilent 1050 and to provide extra cleaning when "wiping" a needle. Also provides a small degree of better resealing after injection compared to Silicone Rubber / PTFE Septa.
Microsolv Technology Corporation Caps, Snap Top, with Red PTFE / White Silicone Rubber / Red PTFE Septa, fitted in smooth, polyethylene, Blue Caps. For use with 11mm, 12x32mm Snap Top autosampler vials. 100/PK.
This septa was designed for specific, older instruments such as Agilent 1050 and to provide extra cleaning when "wiping" a needle. Also provides a small degree of better resealing after injection compared to Silicone Rubber / PTFE Septa.
Microsolv Technology Corporation Caps, Snap Top, with White PTFE Septa, fitted in smooth, polyethylene, Yellow Caps. For use with 11mm, 12x32mm Snap Top autosampler vials. 1000/CS.
This PTFE (only) Septa is for single injections or non-volatile samples as it will not reseal.
Microsolv Technology Corporation Caps, Screw Top, Solid, with a Red-Orange Silicone Rubber / TEF liner, in "knurled", closed Blue Caps. For use with 9-425mm thread,12x32mm autosampler vials. MicroSolv Brand 1000/CS.
Silicone Rubber with TEF liner is inert lowers the cost. Liner is 53° Shore D, 0-2mm. Solid top turns autosampler vials into storage vials.
Microsolv Technology Corporation Caps, Screw Top, with Red PTFE / White Silicone Rubber / Red PTFE Septa, fitted in "knurled", polypropylene, Green Caps. For use with 9-425mm thread, 12x32mm autosampler vials. 100/PK
This septa was designed for specific, older instruments such as Agilent 1050 and to provide extra cleaning when "wiping" a needle. Also provides a small degree of better resealing after injection compared to Silicone Rubber / PTFE Septa.
Microsolv Technology Corporation Caps, Screw Top, with Silicone Rubber / PTFE Pre-Slit Septa, fitted in smooth sided, Robo Style, soft polypropylene, Blue Caps. For use with 9-425mm thread, 12x32mm autosampler vials. 100/PK.
Pre-slit for easy penetration by autosampler needles and to prevent "Septa Plunge" into vials.
Microsolv Technology Corporation Caps, Snap Top, with Silicone Rubber / PTFE Pre-Slit Septa, fitted in smooth, polyethylene, Blue Caps. For use with 11mm, 12x32mm Snap Top autosampler vials. 10,000/CS.
Caps, Snap Top, with Silicone Rubber / PTFE Pre-Slit Septa, fitted in smooth, polyethylene, Blue Caps. For use with 11mm, 12x32mm Snap Top autosampler vials. 10,000/CS.
Microsolv Technology Corporation Caps, Snap Top, with White PTFE Septa, fitted in smooth, polyethylene, Red Caps. For use with 11mm, 12x32mm Snap Top autosampler vials. 1000/CS.
This PTFE (only) Septa is for single injections or non-volatile samples as it will not reseal.
Microsolv Technology Corporation Caps, Screw Top, Solid, with a Red-Orange Silicone Rubber / TEF liner, in "knurled", closed Blue Caps. For use with 9-425mm thread,12x32mm autosampler vials. 100/PK.
Silicone Rubber with TEF liner is inert lowers the cost. Liner is 53° Shore D, 0-2mm. Solid top turns autosampler vials into storage vials.
Microsolv Technology Corporation Caps, Screw Top, with Red Butyl Rubber / Grey PTFE Septa, fitted in knurled polypropylene, White Caps. For use with 24-400mm threaded EPA Style vials. ND24 threads. 100/PK.
Septa is 55 Shore A, (Hardness), is 2.5mm thick and can be used as an autosampler vial cap or for long term storage with any 30, 40 or 60 EPA Style vial that has 40-400 threads. Cap has a 12.5mm top hole.
Microsolv Technology Corporation Caps, Screw Top, with Silicone Rubber / PTFE Pre-Slit Septa, bonded in "knurled", polypropylene, Black Caps. For use with 9-425mm thread, 12x32mm autosampler vials. 1000/CS
Septa bonded to cap for increased performance of penetration and to prevent "Septa Plunge" into vials during injection. Designed for Waters Alliance & Acquity instruments.
Microsolv Technology Corporation Caps, Screw Top, with Silicone Rubber / PTFE Pre-Slit Septa, fitted in smooth sided, Robo Style, soft polypropylene, Black Caps. For use with 9-425mm thread, 12x32mm autosampler vials. 1000/CS.
Pre-slit for easy penetration by autosampler needles and to prevent "Septa Plunge" into vials.
Microsolv Technology Corporation Caps, Screw Top, with Silicone Rubber / PTFE Pre-Slit Septa, fitted in smooth sided, Robo Style, soft polypropylene, Yellow Caps. For use with 9-425mm thread, 12x32mm autosampler vials. 1000/CS.
Pre-slit for easy penetration by autosampler needles and to prevent "Septa Plunge" into vials.